Other Test Instruments
Wide selection of the test instruments and equipment to meet all your needs - Gas Corrosion Test Instruments, Ozone Weather Meters with temperature and humidity control, Fogging Testers, Flammability Test Instruments, Gravel / Chipping Test Equipment, Abrasion Testers, Rain Test Equipment, Heat Aging Test Instruments, Dust Test Equipment, and others.
Gas Corrosion Test InstrumentsGT-100 / GS-UVS / GS-P / GS-DIN
The Gas Corrosion Test Instruments are used to evaluate corrosion resistance of electronic components, components with metallic or organic coatings against a single gas or mixed gases of SO₂(Sulfur Dioxide), H₂S(Hydrogen Sulfide), NO₂(Nitrogen Dioxide), and Cl₂(Chlorine). Test standards such as IEC, ISO, ASTM, DIN, JIS, JEITA, are applicable.
Ozone Weather MetersOMS-LN / OMS-HN / OMS-LNZ / OMS-P / OMS-HNZ
The only Ozone Weather Meters free from outside air influence enable pursuit of accuracy. This instrument performs accelerated ozone degradation testing for organic materials such as rubber, plastic, resin, textile, fabrics used in automobiles, electronic materials, and printed matters as well. The fully closed system allows for true ozone concentration tests. Applicable to ISO 1431-1, ISO 1431-3, JIS K 6259-1, JIS K 6259-2, ISO 18941, JEITA CP-3901B, standards and others.
Fogging TestersWF-1 / WF-2
The Fogging Testers reproduce and accelerate phenomenon that volatile components are generated due to temperature difference from automobile interior materials (rubber, plastic, leather, fiber), and building interior materials, and so on. Selectable from two types - Oil Heating Type corresponding to ISO 6452, and Air Hearing Type for easy maintenance.
Dust Test EquipmentDT-1F / DT-2 / DT-1CF / DT-Z / DT-W
The Dust Test Equipment that tests dustthe durability of in-vehicle parts such as automobile headlights, blinkers, speedometers, and electrical parts against dust. Supports various international standards such as SAE J575, ISO 20653, IEC 60529, IEC 60068-2-68 Lb, DIN 40050 (IP-Schutzarten), JIS D 0207, JIS D 5500, JIS D 5020, JIS C 0920, JSTM J 7602T.
Rain Test EquipmentRA-1 / RA-2, RA-3 / RA-Z
The Rain Test Equipment that tests the water resistance and waterproofness of in-vehicle parts, electrical components, mobile devices, etc. International Protection Code (IP Code) is IPX1, IPX2, IPX3, IPX4, IPX4K, IPX5, IPX6, IPX6K, IPX7, IPX8, IPX9K, supported standards are SAE J575, IEC 60529, JIS C 0920, DIN 40050 (IP-Schutzarten), ISO 20653, JIS Supports a wide range of D 5020, JIS D 0203, and others.
Gravel Test EquipmentJA400 / JA400LA / JA400LACE / JA400LB
Gravel Test Equipment is designed to reproduce the effect of gravel or other media striking exposed paint or coated surfaces of an automobile, also known as chipping resistance test, and has been correlated with actual field results, corresponding to the test standards such as SAE, JASO, and others.
Abrasion Test EquipmentNUS-ISO3 / NUS-ISO3H / SD-1 / JD-3
The Abrasion Testers are for testing abrasion resistance of aluminum anodic oxide films, plating, coatings, plastics, rubber and other products. All kinds of grinding paper can be used, and with a wide range of specimen holders available, not only plate-shaped specimens but specimens of many different shapes can be attached to the instrument. Tests can be designed flexibly in accordance with the specimen's actual use condition.
Flammability Test InstrumentsON-1 / ON-2M / ON-3T / MVSS-2 / MVSS-3 / ER-1 / UL 94 / CS-1S / GW-1
Flammability Testers that complies with USA automotive safety standards of Federal Motor Vehicle Safety Standards (FMVSS), Consumer Product Safety Comission (CPSC), UL94 standard, Canvas Products Association International (CPAI), and other international standards such as ISO, JIS, IEC.