High Voltage Noise / Car Manufacturer's Standard by FNS-AX4-A20-N2447
This model is for carrying out a high pressure noise test of individual automotive manufacturers' demands. It simulates representative high voltage noise of HV and EV.
- Single-phase 3 wire
- AC85 - 240V16A
- 50/60Hz
- DC125V16A
- Pulse: ~ 500V 50kHz (option)
Shinyei Corporation of America is the sole authorized distributor of NoiseKen products. We offer the most direct sales of NoiseKen products available in the US.
CALIBRATION CIRCUIT (18-N1686)
TESTING CONDITION 1 ( CONTINUAL TESTING)
Noise Waveform (reference)
Testing Level (Continual Testing)
| Test level | Vp-p(V) |
| 1 (battery ECU) | 220 |
| 2 (PCU) | 105 |
| 3 (NAVI) | 15 |
Noise Waveform (continual testing)
Testing Frequency fp condition (Continual Testing)
| Test level | Vp-p(V) |
| 1 (battery ECU) | 220 |
| 2 (PCU) | 105 |
| 3 (NAVI) | 15 |
CONDITION 2 (BURST TESTING)
Noise Waveform (burst testing)
Testing Level (Burst Testing)
| Test level | Vp-p(V) |
| 1 (battery ECU) | 120 |
| 2 (PCU) | 30 |
| 3 (NAVI) | 7.5 |
Test Frequency fp condition (Burst Testing)
| Test Frequency fp range (kHz) | 100 ~ 1000 (kHz) |
| Test fp step (kHz) | 10 (kHz) |
| Test Frequency fp point | 90 frequency point |
REQUIRED ADAPTOR
Coupling Adaptor MODEL: CA-805B (Capacitive coupling)
Enable for testing characteristics against the noise only with clamping communication cables of electronics equipments in combination with INS Series.
Enable for testing characteristics against the noise only with clamping communication cables of electronics equipments in combination with INS Series.
- Enable to inject the noise without cutting signal, DC, AC, GND, etc.
- Enable to test the noise resistibility of electronics equipments separated individually.
- Realize to test the noise resistibility effectively since the injection can be directly to signal lines.
- Enable to clamp bundle of signal lines whose maximum diameter is 26mm
| Input voltage : | 4000V Max |
| Input pulse width : | 50~1000ns |
| Dimension / Mass : | (W) 350 X (H) 120 X (D) 130mm / approx. 3kg |
| Storage temp. range : | -5~55℃ |
| Inside clamp diameter : | 26mm |
Shinyei Corporation of America is the sole authorized distributor of NoiseKen products. We offer the most direct sales of NoiseKen products available in the US.