DROP TOWER DT-205 series
DROP TESTER for Mobile Products such as smart phone, wearable device, tablet, laptop.
DT-205 series are drop testers designed for mobile products, and packaged products weighing up to approx. 11lbs (5kg).
They can be used for drop testing in a broad variety of industrial products and consumer products, including electronic devices, wearables, medical devices.
Features
- Specialization to light and small specimen
- High Reproducibility
- Easy Maintenance for Long Term Usage
- Easy-to-Use Test Settings
- Easy-Installation to any Location
- Simple Setting by Simple Construction
Applied Standard
- JIS C 60068-2-31
- IEC 60068-2-31
Analysis system with high-speed camera
Detail drawing of supporting base
DT-205 Detail drawing of supporting base
Applications
- Drop test for digital gadgets such as mobile phones, smart phones, cell phones.
- Drop test for electrical parts, components, semiconductors and sensors.
- Drop test for batteries and chargers.
- Drop test for wearable devices such as fitness trackers, smart watches, glasses, headsets, VR, and goggles.
- Drop test for tablet, laptop PC
- Drop test for audio devices such as microphones and speakers.
- Drop test for medical products, health care products, and medicine.
- Drop test for skin care products and cosmetics.
- Drop test for packaged products.
Specification
| DT-205 | DT-205M | DT-205H | DT-205MH | |
|---|---|---|---|---|
| Test sample maximum weight | Approx. 11.02 lbs (5kg) | |||
| Test sample max. dimensions | Approx. W15.75 inches (400mm) x D14.17 inches (360mm) | |||
| Drop height range |
Approx. 1.64 ~ 4.92 ft (500 ~ 1500mm) *posture holding fall Approx. 0.82 ~ 1.64 ft (250 ~ 1500mm) *free liberation fall |
Approx. 1.82 ~ 6.56 ft (500 ~ 2000mm) *posture holding fall Approx. 0.82 ~ 6.56 ft (250 ~ 2000mm) *free liberation fall |
||
| Drop height setting method | Scale and pointer | |||
| Drop motion of test sample support table | Permanent electromagnetic holder | |||
| Test sample holding method | Pneumatic pen cylinders | |||
| Lifting method | Chain Block | Motor | ||
| Dimensions of tester | Approx. 2.3 x 2.0 x H8.2 ft (700 × 600 × H2500mm) |
Approx. 3.0 x 2.6 X H9.9 ft (900 × 800 × H3000mm) |
||
| Mass of tester | Approx. 397lbs (180 kg) | Approx. 617 lbs (280 kg) | ||
| Air supply pressure | 0.69 MPa | |||
| Power supply | AC100V, Single phase, 5A *1 | AC200V, Three phase, 5A *1 | AC100V, Single phase, 5A *1 | AC200V, Three phase, 5A *1 |
| Ambient temperature | 41 ~ 95ºF (5 ~ 35ºC) *2 | |||
| Reference Standards | JIS C 60068-2-31, IEC 60068-2-31 | |||
| Note |
*1 Avaiable an electrical transformer as a standard accessory *2 As per JIS test location Standard temperature state Class 4 |
|||