SCA

Shinyei Corporation of America

  • HOME
  • ABOUT
    • About SCA
    • Shinyei Group
    • SiteMap
    • Sitepolicy
    • Cookie Policy
    • Privacy Policy
    • Disclaimers
  • PRODUCTS
    • WEATHERING, CORROSION, AND OPTICAL PROPERTIES
    • EMC EMISSION & IMMUNITY
    • DROP & SHOCK
    • VIBRATION
    • BALL BEARINGS
    • MECHANICAL & PHYSICAL PROPERTY OF MATERIALS
    • TEMPERATURE SENSING
    • ENERGY DISPERSIVE X-RAY FLUORESCENCE ANALYZERS
    • NO-DOOR ENVIRONMENTAL CHAMBERS
    • ENVIRONMENTAL & THERMAL SHOCK CHAMBERS
    • HUMIDITY, PARTICLE, AND GAS SENSING
    • CONTRACT TEST SERVICE
  • NEWS
  • CONTACT
CONTACT
 
 
SCA

Shinyei Corporation of America

  • HOME
  • ABOUT
    • About SCA
    • Shinyei Group
    • SiteMap
    • Sitepolicy
    • Privacy Policy
    • Cookie Policy
    • Disclaimers
  • PRODUCTS
    • WEATHERING, CORROSION, AND OPTICAL PROPERTIES
      • Weather Meters
        • GX75
        • SX75
        • SX2D-75
        • S80
        • MV3000(Metal Halide Arc)
        • U48(UV Carbon Arc)
        • FUV(Fluorescent UV Lamps)
        • CCT-LXU
        • CCT-1LX
      • Light Sources
        • 7.5kW Xenon lamp & Sunlight
        • 3kW Metaling Lamp
        • Sunshine Carbon Arc
        • UV Fluorescent Lamp
        • UV Carbon Arc
      • Corrosion Test Chambers
        • CYP-90
        • CYP-120,160,200
        • CCT-1(L)
        • CCT-RX
        • STP-90V-5/CAP-90V-5
        • STP/CAP-110,120,160,200
        • Exhaust Disposal Unit
      • Optical Property Meters
        • Color Meters
        • Gloss Meters
        • Haze Meter
          • HZ-V3(DISCONTINUED)
          • HZ-V4 (NEW)
    • EMC EMISSION & IMMUNITY
      • ESD Simulator
        • IEC61000-4-2 Ed.2 Test Standard
        • ESD simulator(ESS-S3011A+GT-30RB)
          IEC61000-4-2 Ed.3 Test Standard (NEW)
        • ESD simulator(ESS-PS1+GT-31S)
          IEC61000-4-2 Ed.3 Test Standard (NEW)
        • ISO 10605 Ed.2 Test Standard
        • ISO 10605 Ed.3 Test Standard
      • Fast Transinet Burst Simulators
      • Impulse Noise Simulator
      • Lightning Surge Simulator
      • Lightning Surge Simulator for EV fast charging
      • High Voltage Noise
      • Field Decay Load Dump
      • TEM Horn Antenna
      • Thin Plate Broadband Antenna
        • Thin Plate Broadband Antenna(NKU07M32G/NKU2460G)
        • Thin Plate Broadband Antenna(NKU5080G) (NEW)
      • Electromagnetic Field Visualization System
    • DROP & SHOCK
      • Drop Test Systems
        • DT-202 series
        • DT-205 series
        • DT-20e
        • RDT-1000
        • EMH series
      • Shock Test Systems
        • HDST series
        • ASQ series
        • MDST series
        • SDST series
        • PST-300
        • CDS series
      • Material Testing System
        • ACST series
      • Acceleration Measurement
        • SM-500
        • AccStick
      • Field Data Recorder
        • DER-1000
    • VIBRATION
      • Products
      • Basics of Vibration Testing
      • Multi-Axis Vibration Test Systems
      • Single-Axis Vibration Test Systems
      • Vibration Combined Environmental Test Systems
      • Digital Vibration Controller
    • BALL BEARINGS
      • Stainless Steel Ball bearing by AFC bearings
      • Stainless Steel Ball Bearing
        • AISI 440C Stainless Steel Ball Bearings
        • AISI 304 Stainless Steel Ball Bearings
        • AISI 630 Stainless Steel Ball Bearings
        • 2C Series - Ceramic Bearings
        • Grease Free Bearings
        • 1T Series - Pure Titanium Bearings
        • SH series - Stainless Ball Bearing with Aligning Ring
        • SSXC Series - Stainless steel ball bearings with setscrews
        • SF series - AISI440C Flanged Bearing Units
      • Spherical rolling joint SRJ series
    • MECHANICAL & PHYSICAL PROPERTY OF MATERIALS
      • By Test Applications
      • By Test Properties
    • TEMPERATURE SENSING
      • Temperature Probes
        • Stationary Surface Temperature Probes
          • SX Series
          • WE Series
        • Moving/Rotating Surface
          Temperature Probes
          • U Series
        • Moving Wire / Tube Probe
        • Liquid / Semiliquid Probes (Needle type)
        • Special Application Temperature Probes
          • AW Series(for Wafer)
      • Thermometers
        • Handheld Thermometer Model HR series
        • Handheld Thermometer
        • Thermoprinter
        • Thermologger
        • Transducer (Transmitter) HPD Series
        • Non-contact thermometer
        • Soldering iron thermometer
        • Fiber optic thermometer
      • Application
      • Accessories
      • Technical Guide
      • FAQ
    • ENERGY DISPERSIVE X-RAY FLUORESCENCE ANALYZERS
      • VoXER
      • OURSTEX 170
      • OURSTEX 101FA
      • OURSTEX 100FA
      • OURSTEX 100TA-F
      • OURSTEX 200TX
      • OURSTEX 160
      • OURSTEX 160RoHS
      • OURSTEX 160M
    • NO-DOOR ENVIRONMENTAL CHAMBERS
    • ENVIRONMENTAL & THERMAL SHOCK CHAMBERS
      • Temperature and Humidity
      • Thermal Shock
      • Compact Temperature and Humidity
    • HUMIDITY, PARTICLE, AND GAS SENSING
      • Humidity Sensing
        • humidity Sensors
        • humidity and Temperature
        • Thermo-hygrometer/Recorder
        • Temperature humidity converter
        • TDLAS Moisture Analyzers
        • Humidity Generators
      • Particle Sensing
        • Particle Sensor Unit
        • Aerosol Sensor
        • Pollen Sensor
        • Large Particle Sensor
        • PM Sensor
      • IAQ Sensing
        • Handheld Odor Meter
    • CONTRACT TEST SERVICE
  • NEWS
  • CONTACT

NOISEKEN

  1. HOME
  2. PRODUCTS
  3. NOISEKEN
  4. Automotive Transient Surge ISO

Automotive Transient Surge ISO

Automotive Transient Surge ISO

Simulator to reproduce various transient surge phenomena which are generated in a vehicle and required in the international standard ISO-7637-2 (2004) Standard, and evaluate the immune resistibility of the equipped electronics devices against the surge.

  • ISO 7637-2 (2004) Standard compliant simulator
  • Correspondent to the test for 12V/24V/42V systems in a vehicle
  • Stand-alone usage per the each generator unit possible as well as the comprehensive control
  • Large capacity CDN (60V/50A) available (Option)
  • Up to 200A power supply possible (Option)
  • Windows in Japanese applicable for the software program as well
* Private standards or specifi cations by manufactures can be responded upon request.
  • ISS-7610: Pulse 1/2a
  • ISS-7630: Pulse 3a/3b
  • BP4610 : Pulse 2b/4
  • ISS-7650: Pulse 5a/5b

Shinyei Corporation of America is the sole authorized distributor of NoiseKen products. We offer the most direct sales of NoiseKen products available in the US.

  • Description
  • ISS-7610
  • ISS-7630
  • BP4610
  • ISS-7650
  • ISS-7690 / 7602
  • ISS-7601
  • ISS-7630-2

SS-7610(PULSE 1/2A GENERATOR)

SS-7610(PULSE 1/2A GENERATOR)
Pulse 1 :

Simulation of transients due to supply disconnection from inductive loads. It is applicable to DUTs which, as used in the vehicle, remain connected directly in parallel with an inductive load.

Pulse 2a :

Simulates transients due to sudden interruption of currents in a device connected in parallel with the DUT due to the inductance of the wiring harness.

  • Compliant tests to ISO 7637-2 (2004) Standard (Pulse1/Pulse2a generator)
  • Stand-alone usage possible with 60V 30A CDN built-in.

Pulse 1 Output Waveform

Pulse 1 Output Waveform

Pulse 2a Output Waveform

Pulse 2a Output Waveform
  Pulse 1 spec. Pulse 2 spec.
Output voltage (Us) -5V~-720V (-1V step) 5V~300V (1V step)
Output imdedance (Ri) 10Ω, 30Ω, 50Ω 2Ω, 4Ω, 10Ω, 30Ω, 50Ω
Pulse width (td) 50μs, 200μs, 300μs, 500μs, 1ms, 2ms 50μs, 200μs, 300μs, 500μs
Rise time (tr) 1μs : -0.5μs /+0μs 3μs : -1.5μs /+0μs 1μs : -0.5μs /+0μs
Pulse repetition period (t1) 0.5s~99.9s (0.1s step) / P2a : 0.1s~99.9s (0.1s step)
DUT power capacity DC60V / 30A
Dimension (W)430×(H)200×(D)522mm
Mass approx. 20kg
Power consumption 260VA

ISS-7630(PULSE 3A/3B GENERATOR)

ISS-7630(PULSE 3A/3B GENERATOR)

Simulation of transients which occur as a result of the switching processes. The characteristics of these transients are infl uenced by distributed capacitance and inductance of the wiring harness.

  • Compliant tests to ISO 7637-2 (2004) Standard (Pulse 3a/Pulse 3b generator)
  • Stand-alone usage possible with 60V 30A CDN built-in.
  • Frequency sweep (10kHz-100kHz-10kHz) test possible (Option)
  • ≦3.5ns high frequency rise time realized so as to conduct more severe test than the Standard.

Pulse 3a Output Waveform (tr : set at <3.5ns)

Pulse 3a Output Waveform

Pulse 3b Output Waveform (tr : set at <3.5ns)

Pulse 3b Output Waveform
Output voltage -20V~-350V (-1Vstep)
20V~350V (1Vstep)
Output impedance 50Ω
Pulse width(td) 150ns±45ns
Pulse repetition period(t1) 10μs~999μs(1μs step)
*1kHz~100kHz Frequency sweep possible (the option necessary)
DUT power capacity DC60V/30A
Dimension (W)430×(H)200×(D)522mm
Mass Approx. 17kg Power consumption 110VA

Difference of the impulse response among the measurement probes

Difference of the impulse response among the measurement probes

BP4610(PULSE 2B/4 GENERATOR)

BP4610(PULSE 2B/4 GENERATOR)
Pulse 2b :

Simulates transients from d.c. motors acting as generators after the ignition is switched off.

Pulse 4 :

Simulates supply voltage reduction caused by energizing the starter-motor circuits of internal combustion engines, excluding spikes associated with starting.

  • Compliant tests to ISO 7637-2 Standard (Pulse 2b / Pulse 4 generator)
  • ±60V 10A DC ~ 150kHz bipolar amplifi er built-in.
  • Can be substitutable power source for the other pulses generations.
  • Expandable to be 15A or 30A upon addition of an optional external power supply.

* Requirement of 100A / 200A can be responded upon request and discussion.

* Optional software shall be necessary for putting Pulse 2b / 4 out.

Pulse 2b Output Waveform

Pulse 2b Output Waveform

Pulse 4 Output Waveform

Pulse 4 Output Waveform
Pulse 2b UA, Us* 0V~60.0V ±10%±0.5V 0.1V step
Ri 0Ω~0.05Ω
Td 0.1s, 0.2s ,0.5s ,1s ,2s ,4s ±20%
t12, tr, 16* 1ms ,2ms ,5ms ±50%
Pulse 4 UB 0V~60.0V ±10%±0.5V 0.1V step
Us, Ua 0V~-UB ±10%±0.5V -0.1V step
Ri 0Ω~0.02Ω(at shipment)
t7, t8, t10, t11* 1ms~999ms ±10% 1ms step
t9 0.1s~99.9s ±10% 0.1s step
Dimension (W)430×(H) 177×(D)550mm
Mass Approx. 26kg Power consumption 1200VA

*Each parameter can be set individually.

ISS-7650(PULSE 5A/5B GENERATOR)

ISS-7650(PULSE 5A/5B GENERATOR)
Pulse 5a :

Simulation of load dump transient, occurring in the event of a discharged battery being disconnected while the alternator is generating charging current and with other loads remaining on the alternator circuit at this moment.

Pulse 5b :

Simulation of the above load dump transient when a Zener diode is inserted to the battery route.

  • Compliant tests to ISO 7637-2 (2004) Standard (Pulse 5a/Pulse 5b generator)
  • LCR circuit system adopted to realize the actual state in a vehicle accurately as well as the Standard conformance.
  • Stand-alone usage possible with 60V 30A CDN built-in.
  • Suppression voltage can be set in 0.1V step with the built-in programmable circuit (Pulse 5b).

Pulse 1 Output Waveform

Pulse 1 Output Waveform

Pulse 2a Output Waveform

Pulse 2a Output Waveform

Pulse 5c Output Waveform (customized waveform)

Responded upon the particular request. If required, please contact us.

Pulse 5c Output Waveform (customized waveform)
Pulse 5a 12V system 24V system
Output voltage (Us) 20V~100V(0.5V step) 20V~200V(0.5V step)
Output impedance (Ri) 0.5Ω~8Ω(0.5Ω step) 1Ω~8Ω(0.5Ω step)
Pulse width (td) 40ms, 100ms ,200ms, 350ms ,400ms 100ms ,200ms ,350ms ,400ms
Rise time (tr) 10ms(+0, -5ms) 100ms ,200ms ,350ms ,400ms
Pulse 5b 12V system 24V system
Output voltage (Us) 10V~40V(0.1V step)
Pulse width (td) Dependent on Pulse 5a
DUT power capacity DC60V/30A
Dimension (W)488×(H)670×(D)660mm
Mass Approx. 100kg Power consumption150VA(in stand-by)/ 600VA(in charging)

ISS-7690/7602(COUPLING NETWORK & SYSTM RACK)

ISS-7690/7602

Centralized CDN to put the each pulse out in one unit and the system rack to cabin the all pulses generators (ISS-7690) / System rack (ISS-7602).

Insure high frequency Pulse 3a / 3b waveforms which may be dulled due to the wiring length with the centralized CDN output port.

  • Comprehensive control of the battery, all pulses output and the generators switching enabled with the software.
  • Max. 3 power supply channels switchable (1 with the built-in DC power supply (BP-4610) and the other 2 external power supplies terminals).
  • 1μs rise time realized with standard equipped DC interruption function.
  • Precise Pulse 3a / 3b waveforms insured with the CDN output port.
  • Visualize the current fl owing into DUT with the current monitor.
DUT power capacity 60V/50A
DC input 2 channels (Amplifi er power supply & battery)
*Including Pulse 2b, Pulse 4 and arbitrary waveform.
Pulse input Pulse1, Pulse2a/2b ,Pulse3a/3b ,Pulse4, Pulse5a, Pulse5b
Interruption test ≦1μs (in DC interruption), Not switched in fl uctuation of the interruption
Current monitor Monitoring terminal (BNC)output 10mV/A(DC)150kHz
System rack (W)555 × (H)1800 × (D)790mm

ISS-7601(CONTROL SOFTWARE)

Comprehensive control software for the all pulse generators.
  • Comprehensive control software for the all pulse generators.
  • Enables to control the each pulse generator comprehensively.
  • One touch output possible even in Pulse 2b and Pulse 4 whose waveforms assembly may be troublesome.
  • Easy setting of the test conditions with its programming function.
  • Reporting function available to realize the test conditions, comments as well as the result (Preview and print-out also possible).
Sequence setting screen

Sequence setting screen

Preview screen for printing the test result out

Preview screen for printing the test result out

ISS-7630/ISS-7610-N1229(Fast Pulse Slow Pulse Generators)

ISO 7673-3 2007 Standard, provides evaluation of the immunity of devices under test (DUTs) to transient transmission by coupling via lines other than supply lines.
The test transient pulses simulate both fast and slow transient disturbances, such as those caused by the switching of inductive loads and relay contact bounce. Also it provides 3 kinds of the coupling methods.

ISS-7630(Fast Pulse)

Output voltage -20V~-350V(-1V step)
20V~350V(1V step)
Output impedance (Ri) 50Ω
Pulse width (tr) 150ns±45ns
Rise time 5ns±1.5ns, <3.5ns
Pulse repetition period (t1) 10μs~999μs(1μs step)
DUT power capacity DC60V/30A
Dimension (W)430 × (H)200 × (D)522mm
Mass Approx. 17kg Power consumption 110VA

ISS-7610-N1229(Slow Pulse)

Output voltage 5~50V(0.1V step)
-5~-50V(-0.1V step)
Output impedance (Ri) 2Ω
Pulse width (tr) 50μs ±10μs
Rise time 1μs
Pulse repetition period (t1) 0.1~99.9s(0.1s step)
DUT power capacity -
Dimension (W)430 × (H)200 × (D)522mm
Mass Approx. 20kg Power consumption 50VA

Output Waveform

Output Waveform

Shinyei Corporation of America is the sole authorized distributor of NoiseKen products. We offer the most direct sales of NoiseKen products available in the US.

PRODUCTS

  • WEATHERING, CORROSION, AND OPTICAL PROPERTIES
    • Products
    • Weather Meters
      • Super Xenon Weather Meters
      • Xenon Weather Meters
      • Metaling Weather Meters
      • Sunshine Weather Meters
      • Fluorescent Weather Meter FUV
      • UV Fade Meters
      • Spectral Radiation Tester SPX
    • Light Sources
      • 7.5kW Xenon lamp & Sunlight
      • 3kW Metaling Lamp
      • Sunshine Carbon Arc
      • UV Fluorescent Lamp
      • UV Carbon Arc
    • Corrosion Test Chambers
      • Salt Spray Test Chambers
      • CASS Test Chambers
      • Combined Cyclic(CYP)
      • Combined Cyclic(CCT)
      • Custom Test Chambers
      • Options for Corrosion Test Chambers
    • Other Test Chambers
      • Gas Corrosion Test Chambers
      • Ozone Weather Meters
      • Fogging Testers
      • Dust Test Equipment
      • Rain Test Equipment
      • Gravel Test Equipment
      • Abrasion Test Equipment
      • Flammability Test Chambers
    • Optical Property Meters
      • Color Meters
      • Gloss Meters
      • Haze Meters
        • HZ-V3(DISCONTINUED)
        • HZ-V4 (NEW)
      • Image Clarity Meters
      • Reflectance /
        Transmittance Meters and Others
  • EMC EMISSION & IMMUNITY
    • Products
    • ESD simulator
      • ESD Simulator(ESS-S3011A+GT-30RA)
        IEC 61000-4-2 Ed.2 Test Standard
      • ESD Simulator(ESS-PS1+GT-31S) (NEW)
        IEC 61000-4-2 Ed.2/Ed.3 Test Standard
      • ESD Simulator(ESS-S3011A+GT-30RB)
        IEC 61000-4-2 Ed.2/Ed.3 Test Standard
      • ESD Simulator(ESS-S3011A+GT-30R3302KA)
        ISO 10605 Ed.2/Ed.3 Test Standard
      • ESD Simulator(ESS-PS1+GT-31S+ISO-SET-A) (NEW)
        ISO 10605 Ed.2/Ed.3 Test Standard
    • ESD voltage meter (New)
    • Fast Transient Burst Simulators
    • Impulse Noise Simulator
    • Lightning Surge Simulator
    • Lightning Surge Simulator for
      EV fast charging
    • New ISO 7637 Standard Automotive Transient Surge Simulator
    • High Voltage Noise
    • Field Decay Load Dump
    • TEM Horn Antenna
    • Thin Plate Broadband Antenna
      • Thin Plate Broadband Antenna(NKU07M32G/NKU2460G)
      • Thin Plate Broadband Antenna(NKU5080G) (NEW)
    • Electromagnetic Field Visualization System
  • DROP & SHOCK
    • Products
    • Drop Test Systems
      • DT-202 series
      • DT-205 series
      • DT-20e
      • RDT-1000
      • EMH series
    • Shock Test Systems
      • PDST series
      • HDST series
      • ASQ series
      • MDST series
      • SDST series
      • PST-300
      • CDS series
      • Accessories
    • Material Testing System
      • ACST series
    • Acceleration Measurement
      • SM-500
      • AccStick
    • Field Data Recorder
      • DER-1000
  • VIBRATION
    • Products
    • Basics of Vibration Testing
    • Multi-Axis Vibration Test Systems
    • Single-Axis Vibration Test Systems
    • Vibration Combined Environmental Test Systems
    • Digital Vibration Controller
  • BALL BEARINGS
    • Products
    • Stainless Steel Ball bearing by AFC bearings
    • AISI 440C Stainless Steel Ball Bearings
    • AISI 304 Stainless Steel Ball Bearings
    • AISI 630 Stainless Steel Ball Bearings
    • 2C Series - Ceramic Bearings
    • Grease Free Bearings
    • 1T Series - Pure Titanium Bearings
    • SH series - Stainless Ball Bearing with Aligning Ring
    • SSXC Series - Stainless steel ball bearings with setscrews
    • SF series - AISI440C Flanged Bearing Units
  • MECHANICAL & PHYSICAL
    PROPERTY OF MATERIALS
    • Products
    • By Test Applications
      • Plastic / Resin / Rubber
    • By Test Properties
  • TEMPERATURE SENSING
    • Products
    • Temperature Probes
      • Stationary Surface Temperature Probes
        • SX Series
        • AX Series
        • WE Series
      • Moving/Rotating Surface Temperature Probes
        • U Series
      • Moving Wire / Tube Probe
      • Liquid / Semiliquid Probes (Needle type)
      • Special Application Temperature Probes
        • AW Series(for Wafer)
    • Thermometers
      • Handheld Thermometer Model HR series
      • Handheld Thermometer
      • Thermoprinter
      • Thermologger
        • Thermologger AM-8000
        • Thermologger AM-9000
      • Transducer (Transmitter) HPD Series
      • Non-contact thermometer
      • Soldering iron thermometer
      • Fiber optic thermometer
    • Application
    • Accessories
    • Technical Guide
    • FAQ
  • ENERGY DISPERSIVE X-RAY FLUORESCENCE ANALYZERS
    • Products
    • VoXER
    • OURSTEX 170
    • OURSTEX 101FA
    • OURSTEX 100FA
    • OURSTEX 100TA-F
    • OURSTEX 200TX
    • OURSTEX 160
    • OURSTEX 160RoHS
    • OURSTEX 160M
  • NO-DOOR ENVIRONMENTAL CHAMBERS
    • LST Series
  • ENVIRONMENTAL &
    THERMAL SHOCK CHAMBERS
    • Products
    • Temperature and Humidity
    • Thermal Shock
    • Compact Temperature and Humidity
  • HUMIDITY, PARTICLE, AND
    GAS SENSING
    • Products
    • Humidity Sensing
      • humidity Sensors
      • humidity and Temperature
      • Thermo-hygrometer/Recorder
      • Temperature humidity converter
      • TDLAS Moisture Analyzers
      • Humidity Generators
    • Particle Sensing
      • Particle Sensor Unit
      • Particle Sensing Monitor
      • Pollen Sensor
    • IAQ Sensing
      • Handheld Odor Meter
  • CONTRACT TEST SERVICE

  • SUGA
  • NOISEKEN
  • SHINYEI
  • VIBRATION
  • BALL BEARING
  • YASUDA
  • ANRITSU
  • OURSTEX
  • ETAC
sca Shinyei Corporation of America

Head Office
1120 Avenue of the Americas,
4th Floor NewYork, NY 10036
TEL:917-484-7884 / FAX: 212-704-4206

CONTACT US
sca Shinyei Corporation of America

Mexico Liaison Office
Blvd. Bernardo Quintana No.7001,
Q7001 Torre 1 - Int. 808,
Col. Centro Sur, C.P. 76090,
Queretaro, QRO, Mexico
TEL:442-229-0767

CONTACT US
© 2018 Shinyei Corp. of America All rights reserved.