OURSTEX 160M - Energy Dispersive X-ray Fluoresence Analyzer
Small sized, Lightweight and high-sensitivity analyzer. Exclusively used for measurement of hazardous elements.
CONCENTRATION OF ELEMENTAL TECHNOLOGIES WITH HIGH-SENSITIVITY AND HIGH-PRECISION
The energy dispersive X-ray fluorescence analyzer irradiates a primary X-ray to a sample from its X-ray tube. The fluorescent X-ray generated by the analyzer is measured with a semi-conductive detector. Then you can conduct nondestructive qualitative and quantitative analyses of a sample, regardless of its shape.
With use of electronic cooling system Silicon Drift Detector (SDD) for semiconductor detection needing no liquid nitrogen, you can attain analysis of a high count rate and high resolution power in combination with Digital Signal Processor (DSP).
In order to enhance analytical performances, the analyzer is prepared to satisfy the conditions for optical excitation what can maximize energy resolution power and count sensitivity.
Compliance with the Soil Pollution Control Law
Following the enactment of “Soil Pollution Control Law” effective on February 15, 2003, the implementation of content test is also mandatory in addition to dissolution test.
With OURSTEX 160M you can make an on-site judgment easily and quickly about the standard value of heavy metal content because of its compactness and portability.
●Designated Hazardous Substances and Criterion in Controlled Area (Excerpt in part)
Substances for Analysis | Element | Soil Elution Criterion | Soil Content Criterion |
Cadmium and its compounds | Cd | 0.01 mg/ℓ or less | 15Omg/kg or less |
Lead and its compounds | Pb | 0.01 mg/ℓ or less | 15Omg/kg or less |
Hexavalent chromium compounds | Cr | 0.05 mg/ℓ or less | 250mg/kg or less |
Arsenic compounds | As | 0.01 mg/ℓ or less | 15Omg/kg or less |
Mercury and its compounds | Hg | 0.0005 mg/ℓ or less | 15mg/kg or less |
Selenium and its compounds | Se | 0.01 mg/ℓ or less | 15Omg/kg or less |
Shinyei Corporation of America is the authorized distributor of OURSTEX products. We offer the most direct sales of OURSTEX products available in the US.
Features
- Small-sized and lightweight , most suited analyzer for on-site analysis.
- Quickly attainable nondestructive analysis of composition
- Enhanced sensitivity targeting medium or heavy metal elements
- Only AC230V - 5A is used for utility. (No liquid nitrogen or cooling water)
- No setting of controlled area is required.
Application
- Hazardous heavy metal analysis in the soil
- Analysis of environmental industrial waste materials
- Research of pollution by heavy metals at factory sites, drilling mud in tunnels, etc
Specification
Analytical principle | Energy Dispersive X-ray Fluorescence Analyzer |
Analytical object | Environmental samples (solid, powder and liquid) for soil analysis |
Element to be analyzed | S, Cr, As, Se, Cd, Hg, Pb (13AI to 92U) |
Filtration mechanism | Primary filter (3 types) / Secondary filter-Auto change for one type only |
Shape of sample chamber | 31mmφ open end sample holder |
Environment of sample clamber | Atmospheric |
Rated X-ray output | 48kV、2mA, 50W maximum |
Detector | Electronic cooling Silicon Drift Detector |
Counting circuit | Digital processing type |
Use conditions | Temprature : 5 ~ 27 ℃ Humidity : 20 ~ 75 % Power supply: AC230V, 5A(50/60Hz) Facility : Grounding Class D |
Other (optional) | Ink jet color printer and mouse Heavy metal sample for analysis management (for creation of analytical line) |
Before an implementation of OURSTEX 160M, a notification to Labor Standards Supervision Office is required.
Caution : For your correct and safe use, please be sure to read the operation manual in advance.
Dimensional drawing
● The product specifications or designs in this literature are subject to change without notice for improvements.
● The product colors may differ from actual ones due to printing.
Shinyei Corporation of America is the sole authorized distributor of OURSTEX products. We offer the most direct sales of OURSTEX products available in the US.